- Sell Repair welding materials
- Post Date: Jun 27, 2008
- Expiry date: Jun 25, 2018
CMC TIG ROD FOR HARD SURFACING
CMC-SKD11-3 Hardness: HRC56¡«58 1.2 1.6 2.4
For welding cold work steels, punch die, cut die, industrial knives, forming dies, harden surface of work piece.
This is a sort of high hardness, grinding-resisted, good toughness Argon filler rod.
CMC-SKD61-2 HRC52¡«57 1.0 1.2 1.6 2.4 3.2
For welding hot forging die, hot cut die, hot punch die, hot formation die, hot work tool, steel casting die.
CMC-SKD61 HRC42¡«46 0.9 1.2 1.6 2.4
For welding Aluminum & Copper casting die.Extrudsion dies.
Well heat-resisted, grinding-resisted, crack-resisted.
CMC-SKD61-42 HRC42¡«48 1.6
For welding hot forging die, Aluminum & Copper hot forging die, Aluminum & Copper casting die.
Well heat-resisted, grinding-resisted, crack-resisted.
CMC-8407-H12 HRC52¡«57 1.0 1.2 1.6 2.4 3.2
For welding hot forging die, hot cut die, hot punch die, hot formation die, hot work tool, steel casting die.
CMC-8407 HRC40¡«45 0.9 1.2 1.6 2.4
For welding the die made of the alloy of Zinc,Aluminum, Stannum, etc.
CMC-M3-2 HRC61¡«63 1.2 1.6 2.4
For welding & stretching, hot work and high hardness tool mold, hot forging general die, hot punch die, screw die, grinding-resisted hard surface, high-speed steel.
CMC-MS-3 Untreated: HRC30¡«32 After age hardening 2H/500¡æ: HRC48¡«50 1.2 1.6 2.4
Special hardening good toughness alloy, especially adapt to Aluminum gravity cast, gate, be able to extend product’s life-span for 3-5 times afterwards. Be able to manufacture the greatly exact mold, super satin process, heat-resisted and crack-resisted when doing gating –weld.
CMC TIG ROD FOR UNDERLAY BUILD-UP
CMC-30N 1£®2 1.6 2.0 2.4
For dissimilar-metal joint and underlay build-up of hard surfacing.
CMC-60N 1.2 1.6 2.4
Welding to meld high hardness steel. For repairing of cracks, welding and rebuilding
CMC-61N 1£®6 2.4
Welding to meld high hardness steel. For repairing of cracks, welding and rebuilding.
CMC-67N 1.6 2.4 3.2
For repairing of all kinds of cast iron.
CMC TIG ROD WIRES FOR REPAIR PLASTIC DIE
CMC-75 HRC 25-27 1.0 1.2 1.6 2.4
Injection thermosetting plastic die, good performance at machining£¬ used to weld shoes die, easy to engraving machining
CMC-PDS-3 HRC 28-30 0.9 1.0 1.2 1.6 2.0 2.4
Injection thermosetting plastic die, heat-resisted die and corruption- resisted die, good performance at cutting and machining
CMC-718H HRC 30-33
Argon welding wire fitting for injection thermosetting plastic die .good machining performance after, with uniform texture and high purity, good capability of buffing and photoetching, after welding.
CMC-2738 HRC 32-35 0.9 1.0 1.2 1.6 2.0 2.4
Injection thermosetting plastic die, heat-resisted die, corruption-resisted die, good performance at machining, easy to cut, buffing and electrical discharge machining
CMC-P20 HRC 30 0.9 1.0 1.2 1.6 2.0 2.4
Injection thermosetting plastic die, heat-resisted die, casting copper die
CMC-P20H HRC 30-33
Hardness was improved on the base of existing advantages of original product
CMC-P20
Argon welding wire fitting for injection thermosetting plastic die, good performance at machining and photoetching ,with uniform texture and high rigidity after welding.
CMC-P20Ni
Capability of buffing was improved on the base of existing advantages of original product
CMC-P20
Argon welding wire fitting for injection thermosetting plastic die, better performance at machining and photoetching
CMC-NAK80 HRC 35-40 0.9 1.2 1.6
Mirror Polishing, Injection thermosetting plastic die
CMC-NAK100 HRC 35-40
Capability of buffing was improved on the base of existing advantages of original product
CMC-NAK80
Have requirement for excellent capability of buffing
CMC-S136H
Acid-proof die steel, argon welding rod fitting for the production of injection thermosetting plastic die such as PS and SAN
Good capability of erode-resisted, buffing, wearing -resisted, machining and stability during the quench after welding.
CMC-S136N
Capability of buffing was improved on the base of existing advantages of original product CMC-S136
Excellent capability of buffing, erode-resisted, and hardness was improved during aging.
CMC-2316
Acid-proof die steel, fit for PVC¡¢POM¡¢CA
CMC-SKD11-3 Hardness: HRC56¡«58 1.2 1.6 2.4
For welding cold work steels, punch die, cut die, industrial knives, forming dies, harden surface of work piece.
This is a sort of high hardness, grinding-resisted, good toughness Argon filler rod.
CMC-SKD61-2 HRC52¡«57 1.0 1.2 1.6 2.4 3.2
For welding hot forging die, hot cut die, hot punch die, hot formation die, hot work tool, steel casting die.
CMC-SKD61 HRC42¡«46 0.9 1.2 1.6 2.4
For welding Aluminum & Copper casting die.Extrudsion dies.
Well heat-resisted, grinding-resisted, crack-resisted.
CMC-SKD61-42 HRC42¡«48 1.6
For welding hot forging die, Aluminum & Copper hot forging die, Aluminum & Copper casting die.
Well heat-resisted, grinding-resisted, crack-resisted.
CMC-8407-H12 HRC52¡«57 1.0 1.2 1.6 2.4 3.2
For welding hot forging die, hot cut die, hot punch die, hot formation die, hot work tool, steel casting die.
CMC-8407 HRC40¡«45 0.9 1.2 1.6 2.4
For welding the die made of the alloy of Zinc,Aluminum, Stannum, etc.
CMC-M3-2 HRC61¡«63 1.2 1.6 2.4
For welding & stretching, hot work and high hardness tool mold, hot forging general die, hot punch die, screw die, grinding-resisted hard surface, high-speed steel.
CMC-MS-3 Untreated: HRC30¡«32 After age hardening 2H/500¡æ: HRC48¡«50 1.2 1.6 2.4
Special hardening good toughness alloy, especially adapt to Aluminum gravity cast, gate, be able to extend product’s life-span for 3-5 times afterwards. Be able to manufacture the greatly exact mold, super satin process, heat-resisted and crack-resisted when doing gating –weld.
CMC TIG ROD FOR UNDERLAY BUILD-UP
CMC-30N 1£®2 1.6 2.0 2.4
For dissimilar-metal joint and underlay build-up of hard surfacing.
CMC-60N 1.2 1.6 2.4
Welding to meld high hardness steel. For repairing of cracks, welding and rebuilding
CMC-61N 1£®6 2.4
Welding to meld high hardness steel. For repairing of cracks, welding and rebuilding.
CMC-67N 1.6 2.4 3.2
For repairing of all kinds of cast iron.
CMC TIG ROD WIRES FOR REPAIR PLASTIC DIE
CMC-75 HRC 25-27 1.0 1.2 1.6 2.4
Injection thermosetting plastic die, good performance at machining£¬ used to weld shoes die, easy to engraving machining
CMC-PDS-3 HRC 28-30 0.9 1.0 1.2 1.6 2.0 2.4
Injection thermosetting plastic die, heat-resisted die and corruption- resisted die, good performance at cutting and machining
CMC-718H HRC 30-33
Argon welding wire fitting for injection thermosetting plastic die .good machining performance after, with uniform texture and high purity, good capability of buffing and photoetching, after welding.
CMC-2738 HRC 32-35 0.9 1.0 1.2 1.6 2.0 2.4
Injection thermosetting plastic die, heat-resisted die, corruption-resisted die, good performance at machining, easy to cut, buffing and electrical discharge machining
CMC-P20 HRC 30 0.9 1.0 1.2 1.6 2.0 2.4
Injection thermosetting plastic die, heat-resisted die, casting copper die
CMC-P20H HRC 30-33
Hardness was improved on the base of existing advantages of original product
CMC-P20
Argon welding wire fitting for injection thermosetting plastic die, good performance at machining and photoetching ,with uniform texture and high rigidity after welding.
CMC-P20Ni
Capability of buffing was improved on the base of existing advantages of original product
CMC-P20
Argon welding wire fitting for injection thermosetting plastic die, better performance at machining and photoetching
CMC-NAK80 HRC 35-40 0.9 1.2 1.6
Mirror Polishing, Injection thermosetting plastic die
CMC-NAK100 HRC 35-40
Capability of buffing was improved on the base of existing advantages of original product
CMC-NAK80
Have requirement for excellent capability of buffing
CMC-S136H
Acid-proof die steel, argon welding rod fitting for the production of injection thermosetting plastic die such as PS and SAN
Good capability of erode-resisted, buffing, wearing -resisted, machining and stability during the quench after welding.
CMC-S136N
Capability of buffing was improved on the base of existing advantages of original product CMC-S136
Excellent capability of buffing, erode-resisted, and hardness was improved during aging.
CMC-2316
Acid-proof die steel, fit for PVC¡¢POM¡¢CA
- Company Name:
- cmc welding materials corp
- Contact Person:
- Mr. wang
- E-mail:
- Business Phone:
- 0086-021-64138629
- Fax Number:
- 0086-021-64134207
- Mobile:
- Zip:
- 201100
- Address:
- Room704,Lane539,East xinjianroad,Minhang District,shanghai